Pound the (OmniPod) Alarm

From: System Documentation: New OmniPod PDM Model UST400

Have you ever experianced an OmniPod alarm that wouldn't stop? Have you gone online to find out how to save yourself from the incessant squeal and receive tips like: You can open the pod and take out the batteries, put it in the freezer, hit it with a hammer, or my favorite... I put it in the driveway and ran it over with my car.

While I have to admit that a few of those tips sound like a great stress reliever, you don't really have to go to all of that trouble. All you need actually, is a paper clip. The new smaller OmniPod has a manual shut-off port (Just like the first generation did) for stopping that annoying alarm! If you'll refer to the diagram above that I borrowed from page 131 of the system documentation for the new OmniPod PDM Manual (Model UST400), you'll see where the port resides.

Just follow the instructions and don't forget to give the paper clip a firm push (It has to break through a thin layer of plastic) and the alarm will be no more. Best part? You won't slip with a kitchen knife as you try to crack the shell open and cut your finger off.

Comments

[Bennet]

How about Batting Practice?

[Scott Benner]

That would work too Bennet, good thinking!

[Dori]

Thanks for the info but my daughter REALLY likes pounding them with the hammer. :)

[Scott Benner]

I can't lie, smashing them does provide major stress relief and fun Dori! Watch your fingers...